HP LaserJet Enterprise 600 Printer M602 series - Link speed and duplex settings

background image

Link speed and duplex settings

The link speed and communication mode of the print server must match the network. For most situations,

leave the product in Auto mode. Incorrect changes to the link speed and duplex settings might prevent

the product from communicating with other network devices. If you need to make changes, use the

product control panel.

NOTE:

Making changes to these settings causes the product to turn off and then on. Make changes

only when the product is idle.

1.

At the control panel, press the Home button.

2.

Open each of the following menus:

a. Administration

b. Network Settings

c.

Jetdirect Menu

d. Link Speed

3.

Select one of the following options.

Setting

Description

Auto

The print server automatically configures itself for the highest link speed and
communication mode allowed on the network.

10T Half

10 megabytes per second (Mbps), half-duplex operation

10T Full

10 Mbps, full-duplex operation

100TX Half

100 Mbps, half-duplex operation

100TX Full

100 Mbps, full-duplex operation

100TX Auto

Limits auto-negotiation to a maximum link speed of 100 Mbps

1000T Full

1000 Mbps, full-duplex operation

4.

Press the

OK

button. The product turns off and then on.

68

Chapter 5 Connect the product with Windows

ENWW