Configure a tray when loading paper
1.
Load paper in the tray. Close the tray if you are using a tray other than Tray 1.
2.
The tray configuration message appears.
3.
Press the
OK
button to accept the detected size. Or, press the back arrow to choose a different
configuration, and continue with the following steps.
4.
To modify the tray configuration, press the down arrow to highlight the correct size, and then
press the
OK
button.
NOTE:
The product automatically detects most paper sizes in trays other than Tray 1.
5.
Press the down arrow to highlight the correct type, and then press the
OK
button.